Part detail
Body Length: 1.188 inches maximum Reliability Indicator: Not established Body Diameter: 0.515 inches maximum
164-5010NSN5905-01-351-3649CAGEK1021
Body Length: 1.188 inches maximum Reliability Indicator: Not established Body Diameter: 0.515 inches maximum
Detailed description
164-5010 procurement notes
Body Length: 1.188 inches maximum Reliability Indicator: Not established Body Diameter: 0.515 inches maximum
Specifications
Reference data
Multi-line procurement
Sourcing more than one part?
Upload a bill of materials (BOM) or paste a list of part numbers — every line bundles into a single RFQ. No checkout, no payment.
Compliance
- AS9120:2025· Aerospace QMS
- ISO 9001:2015· Quality Management
- FAA AC 00-56B· Voluntary Industry Distributor Accreditation
- U.S. ONLY· Fulfillment
NSN Information for Part Number 164-5010 with NSN 5905-01-351-3649, 5905013513649
Characteristics Data of NSN 5905-01-351-3649, 5905013513649
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.400 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.515 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.093 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.688 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, V FLATTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3240.0 MINIMUM AND 3260.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0/+200.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -55.0/+125.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 20.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
| ABNB | FIRST FLAT LENGTH | 0.210 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.188 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AECZ | MOUNTING LIP DIAMETER | 0.5150 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0630 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3240.0 MINIMUM AND 3260.0 MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |