Part detail
Microcircuit Linear
04EM072-1NSN5962-01-028-8017CAGE24587
Microcircuit Linear
Detailed description
04EM072-1 procurement notes
Microcircuit Linear
Specifications
Reference data
Multi-line procurement
Sourcing more than one part?
Upload a bill of materials (BOM) or paste a list of part numbers — every line bundles into a single RFQ. No checkout, no payment.
Compliance
- AS9120:2025· Aerospace QMS
- ISO 9001:2015· Quality Management
- FAA AC 00-56B· Voluntary Industry Distributor Accreditation
- U.S. ONLY· Fulfillment
NSN Information for Part Number 04EM072-1 with NSN 5962-01-028-8017, 5962010288017
Characteristics Data of NSN 5962-01-028-8017, 5962010288017
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.355 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 600.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | AN/SPS-48A(V)FCADT FSCM 24930 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND HIGH SPEED AND W/STROBE AND COMPLEMENTARY OUTPUTS AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 4 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 COMPARATOR, VOLTAGE, DIFFERENTIAL |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-5 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -6.0 VOLTS MINIMUM POWER SOURCE AND 6.0 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 22.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD AND EYELET GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 24930-G390532 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 10 PIN |