Part detail
Special Features: 125LB ansi flanged ports, 2IN.-SIZE discharge, 2 1/2IN.-SIZE suction Media for Which Designed: Water, fresh Maximum Discharge Flow Rate: 175.0 gallons per minute
177708NSN4320-01-316-0124CAGE7A842
Special Features: 125LB ansi flanged ports, 2IN.-SIZE discharge, 2 1/2IN.-SIZE suction Media for Which Designed: Water, fresh Maximum Discharge Flow Rate: 175.0 gallons per minute
Detailed description
177708 procurement notes
Special Features: 125LB ansi flanged ports, 2IN.-SIZE discharge, 2 1/2IN.-SIZE suction Media for Which Designed: Water, fresh Maximum Discharge Flow Rate: 175.0 gallons per minute
Specifications
Reference data
Multi-line procurement
Sourcing more than one part?
Upload a bill of materials (BOM) or paste a list of part numbers — every line bundles into a single RFQ. No checkout, no payment.
Compliance
- AS9120:2025· Aerospace QMS
- ISO 9001:2015· Quality Management
- FAA AC 00-56B· Voluntary Industry Distributor Accreditation
- U.S. ONLY· Fulfillment
Characteristics Data of NSN 4320-01-316-0124, 4320013160124
| MRC | Criteria | Characteristic |
|---|---|---|
| AHZV | (NON-CORE DATA) SUBMERSIBILITY | NONSUBMERSIBLE |
| CSYL | PRIME MOVER POWER RATING | 5.0 HORSEPOWER |
| AHYV | MAXIMUM DISCHARGE FLOW RATE | 175.0 GALLONS PER MINUTE |
| AAYT | INTAKE CONNECTION QUANTITY | 1 |
| AHZA | PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| ELEC | VOLTAGE IN VOLTS | 208.0 AND 230.0 AND 460.0 |
| AAYU | INTAKE CONNECTION TYPE | ROUND FLANGE |
| AAYV | DISCHARGE CONNECTION QUANTITY | 1 |
| AENK | COOLING METHOD | AIR TO AIR COOLED |
| FEAT | SPECIAL FEATURES | 125LB ANSI FLANGED PORTS,2IN.-SIZE DISCHARGE,2 1/2IN.-SIZE SUCTION |
| AKNA | INCLOSURE TYPE | OPEN |
| AHZG | CENTRIFUGAL PUMP IMPELLER SUCTION TYPE | SINGLE |
| AAYW | DISCHARGE CONNECTION TYPE | ROUND FLANGE |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AMPS | CURRENT RATING IN AMPS | 17.9 AND 16.2 AND 8.1 |
| AHYZ | OPERATING SPEED AT RATED CAPACITY | 3500.0 REVOLUTIONS PER MINUTE |
| AKDJ | PRIME MOVER TYPE | ELECTRIC MOTOR |
| AENC | PUMP QUANTITY | 1 |
| AAXH | PRIME MOVER QUANTITY | 1 |
| FAAZ | PHASE | THREE |
| AAXS | PRIME MOVER COOLING MEDIUM | AIR |
| AAXX | MOUNTING TYPE | BASE |
| AHYX | TOTAL HEAD | 85.000 FEET |
| AHZF | CENTRIFUGAL PUMP IMPELLER QUANTITY | 1 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AJAG | III UNPACKAGED UNIT WIDTH | 18.0000 INCHES NOMINAL |
| AHZE | CENTRIFUGAL PUMP DESIGN | MIXED FLOW |
| ACDC | CURRENT TYPE | AC |
| AHZS | OPERATION RELATIONSHIP DESIGN | SIMULTANEOUS |
| AHYW | DISCHARGE PRESSURE | 175.0 POUNDS PER SQUARE INCH GAGE |
| AAYD | STAGE QUANTITY | 1 |
| AJAF | III UNPACKAGED UNIT LENGTH | 22.250 INCHES NOMINAL |
| AJAH | III UNPACKAGED UNIT HEIGHT | 5.500 INCHES NOMINAL |
| AJAL | III PUMP BASIC MATERIAL | IRON |
| ACKL | MEDIA FOR WHICH DESIGNED | WATER, FRESH |