Part detail
Microcircuit Memory
116598 7NSN5962-01-056-4119CAGE38200
Microcircuit Memory
Detailed description
116598 7 procurement notes
Microcircuit Memory
Specifications
Reference data
Multi-line procurement
Sourcing more than one part?
Upload a bill of materials (BOM) or paste a list of part numbers — every line bundles into a single RFQ. No checkout, no payment.
Compliance
- AS9120:2025· Aerospace QMS
- ISO 9001:2015· Quality Management
- FAA AC 00-56B· Voluntary Industry Distributor Accreditation
- U.S. ONLY· Fulfillment
NSN Information for Part Number 116598 7 with NSN 5962-01-056-4119, 5962010564119
Characteristics Data of NSN 5962-01-056-4119, 5962010564119
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 1.230 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 500.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | CONVERTER,SIGNAL DATA,TYPE CV-3276/ASH-22(V) |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND W/ENABLE AND EXPANDABLE AND W/BUFFERED OUTPUT AND WIRE-OR OUTPUTS AND PROGRAMMABLE AND PROGRAMMED AND W/DECODED OUTPUT |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 8 INPUT |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 25.00 NANOSECONDS MINIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 75.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| CZER | MEMORY DEVICE TYPE | ROM |
| CZZZ | MEMORY CAPACITY | UNKNOWN |
| TEST | TEST DATA DOCUMENT | 36452-116598 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 24 PRINTED CIRCUIT |